[Completed][MG] RX-93-V2 Hi-Nu Gundam Ver. KA Amuro Ray's Customize MS - [Updated 7th December 2014]

It's a while since I last build my kits lol... I'm kinda back from my short hiatus of building Gunpla but won't be doing as much as I did last time lol... To start things off, I finally got this kit, which is what I wanted all along too alongside with Nightingale but sold out lol... I bought it at a promotional price at Hobby Art Work so it's quite worth the buy lol...

I do have some plans on customizing this as part of my Dark Mobile Suit project... But it's tentative, so it's not confirm yet lol...

Click on 'Read More' to view more pics! XD

[Completed][MG] Double Fin Funnel Set for Nu Gundam Ver Ka

This is an add-on accessory for MG Nu Gundam Ver Ka.. Additional 8 more Fin Funnels, and a sheet for the beam effects.

Will need to spray paint the yellow parts, as my existing Nu Gundam did the same lol..

Click on 'Read more' to view more pics XD

[12][MG] RX-0 Unicorn Gundam 02 Banshee Green Psycho Frame Exclusive Part 04 - Poses in Destroy Mode!!!

And here's the Unicorn Banshee posing in Destroy mode XD

I played around with my iPhone camera settings in this part. Quality looks good lol... Do drop some suggestions so that I can improvise on my photo-taking skills. Don't suggest me to get a DSLR camera though as I'm on a budget lol...

Click on 'Read More' to view the full post! XD

This was taken without flash light and no effects...

[11][MG] RX-0 Unicorn Gundam 02 Banshee Green Psycho Frame Exclusive Part 03 - Poses in Unicorn Mode!!!

I did managed to have some time doing some various poses for this Banshee in Unicorn mode last night. I didn't managed to do poses in Destroy mode yet but I had already transformed it so probably I could make it do some poses tonight lol...

And this is the first time I was so satisfied the fact that I can do much more poses on this Banshee because the parts stayed together really well. I hope this would be the same thing for my Banshee Titanium Finish Version lol...

Click on 'Read more' to view the full post XD

Flying upwards...

[Completed][MG] HMS-02 'Holy Knight Stein' Sinanju Stein Painted Build for HLJ's Playing with Plamo Competition

Project Name: 

HMS-02 Holy Knight Stein

Armaments:
- Holy Shield x2
- Holy High Beam Rifle x1
- Holy Bazooka x2
- Holy Beam Saber x2
- Holy Beam Blade x2 (Eject to become Holy Beam Saber)

Special Ability:
- Blade of Justice (From Holy Beam Blade)

This is another Sinanju Stein I got (Don't ask me why I buy another one) and this time I'm using this kit to enter into HLJ's "Playing With Plamo" competition. I'm entering as an intermediate modeler (I'm still a noob lol) cos the only thing I enjoy doing is customizing it's colors lol...

I'm only posting this now cos the competition rules stated that I can only post my pics after the competition is over and the winners have been announced.

This kit is also being featured in CustoMecha website as well =D
http://customecha.com/mg-hms-02-holy-knight-stein-sinanju-stein-painted-build/

[MG] RX-0 Unicorn Gundam 02 Banshee Green Psycho Frame Exclusive Part 02

HLJ's Playing with Plamo has released their winners result as shown in my previous blog post. While I didn't win anything there, I was so happy that I can finally release all my WIP photos of my competition entry that I've worked on for the past months lol...

Back to main topic, I'm finishing up the remaining stuffs and skipped building it's Hyper Bazooka lol...

Not sure why the yellow coloring though... 

[MG] RX-0 Unicorn Gundam 02 Banshee Green Psycho Frame Exclusive Part 01

This is the Premium-Bandai online exclusive kit. A Banshee with green psychoframe, without it's normal Banshee weapons, just a re-coloring based on the white Unicorn gundam lol... Anyway, they did coated the gold parts chromed so which I like it lol...

I'm thinking of taking it's split horn to contribue to my "Holy Emperor Unicorn" project.. Let's see how first lol...

Based on Unicorn Gundam manual... Make sense since only difference is the Head lol...

[MG] RX-0 Unicorn Gundam Full Psycho Frame MS Titanium Finish Ver

I have been searching for this kit for many months, ever since I bought the Banshee Titanium finish kit. I looked everywhere but the price offered was way off my budget (SGD$600+) so I KIV it until last week I went to surf eBay and found one seller selling this at SGD$380, and also the cheapest I can find. So I bought it off lol...

I'm going to build this in Destroy mode cos firstly I built this a lot previously so there's no need for me to build it in Unicorn mode and secondly, I'm still scared to do it's transformation when all the part joints are so freaking tight!

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 06

Now that the decals are all dried up and set, finally now is the time to piece them together!

Shiny mono-eye lol

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 05

These past few days I was busy applying the water slide decals for Sazabi Ver. Ka. Initially I thought of updating it daily then then I think again that it would be feasible to put them all together into this post instead...

There are a total of 152 decals to apply, majority are mostly the really small decals, very straining on my eyes, but manage to finish it eventually lol...

Smaller decals are the first few to be applied if you're going by sequence...

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 04

Managed to finished the backpack, funnels and it's weapons today lol... I will be fully focusing on applying the water slide decals for this tomorrow, piece them together and do a comparison with my old MG Sazabi Metallic Coating Version lol...

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 03

I have completed the mobile suit parts today. I'm not sure why my iPhone camera lighting is a bit weird today so apologies for the bad image quality >.<

Showing pistons... 

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 02

Today I was planning to do spray painting under the void deck of my block. But because I forgot to pass the school gate keys back to my colleague, I had to go back early in the morning to open the gates and also brought my MG Sazabi along with the spray paint cans so that I can do over there.

That's what I called efficiency lol... Of course I cleared up the area I was working at after I finished spray painting lol... I was actually out with my other colleagues the entire day today so I only managed to finished up panel lining all the red parts and pieced the head and body. As usual practice when dealing with my competition kit, I'm not joining the parts together for now, as I'm planning to apply the water slide decals and I find it easier to apply it when it's in separate parts.

Finally no more yellow color lol...

[MG] MSN-04 Sazabi "Ver. Ka" Char Aznable's MS for New Type Part 01

After the long wait, from pre-ordering in October to some postal delay hiccups in December (this month), this newest kit has finally arrived to my home at last!!!! XD Accompanied with some other kits I have bought, this is one of the two biggest kits I have ever received lol...

I'm planning to do some spray painting on most of the parts. I'm retaining the red color don't worry lol...

[MG] RX-93 Nu Gundam Ver. Ka Amuro Ray Cusomize MS for NewType Part 04

Wrapping up whatever parts that are left for Nu Gundam...

[MG] RX-93 Nu Gundam Ver. Ka Amuro Ray Cusomize MS for NewType Part 03

The pyscho frame parts are a real killer... Not only they are small, it require you to apply small silver foil stickers at various parts... Really need a lot more focus on that portion...

23rd November 2013 Afternoon:

See both sides and top, really need to place those stickers carefully...

[MG] RX-93 Nu Gundam Ver. Ka Amuro Ray Cusomize MS for NewType Part 02

Continuing to build the Nu gundam, and I realized that it's pyscho frame parts are really challenging than I expected it to be...

All pyscho frame parts are hidden for now, I will show them once I completed it.

23rd Nov 2013 Morning:

[MG] RX-93 Nu Gundam Ver. Ka Amuro Ray Cusomize MS for NewType Part 01

Finally exams are over and I'm back on building more Gunpla kits!!!

But unfortunately I didn't have much spare time yesterday and today so I only did managed to spray paint the yellow parts into gold instead. I'm temporary KIV-ing the rest of the spray painting and probably save it for titanium finish version instead.

[MG] MSN-06S Sinanju Ver. Ka Titanium Finish Version

I really like Sinanju so much, that I ordered this titanium finish kit from HLJ haha... @.@

[MG] RX-0 Unicorn Gundam 01 Full Armor Green Pyschoframe

After quite a few years since I last build both of my Unicorn Gundam kits, I started working and bought this kit to build for fun since I already know how the Unicorn is assembled (It's the same MS with just some different gadgets and stuffs haha...) I had an iPhone during that time onwards so I was thinking of taking pictures of it part by part.